OEM Factory for Cable Ladder Vs Cable Tray - HC1-C Hesheng Perforated Cable Tray – Hesheng

Short Description:

Cable Trunking of H.S. is an enclosed wiring running system used to support and protect electrical wires and cables. HT1-LR Left Hand Reducer is one of the Hesheng cable trunking components , applied as reducer connector at left side.

Cable Trunking is permitted in a variety of indoor and outdoor applications.

Cable Trunking Advantages:

· reasonable and easy maintaining and installation means.

· The cables are contained in trunking, there is no risk of cable insulation to be damaged.

· Cables are safe enough against dust and humidity.

· Alternations are easy accessible.

· Trunking systems has a long service life.

Send email to us

Product Detail

Standard

Product Tags

Feedback (2)

We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Cable Raceway, Cable Tray Manufacturer, Table Cable Tray, We sincerely welcome pals to negotiate enterprise and start cooperation. We hope to join hands with pals in different industries to produce a outstanding foreseeable future.

OEM Factory for Cable Ladder Vs Cable Tray - HC1-C Hesheng Perforated Cable Tray – Hesheng Detail:

Product description

Hesheng solid and perforated bottom cable tray system is ideal solution for instrumentation cable and electrical cable runs in industrial or commercial cable management applications, helping eliminate the need for conduit or ladder.
Channel Cable Trays consist of a one-piece, ventilated or solid bottom contained within longitudinal side members. Provides ventilation with added cable support frequency and with the bottom configuration providing cable support every 4 or less inches. Available in metal and nonmetallic materials. Generally used with control and instrumentation cables in moderate heat generating applications with short to intermediate support spans of 5 feet to 20 feet. Trough cable tray bottom is available in flat sheet or corrugation that is 3 times stronger and 21 times stiffer than flat sheet bottoms. Corrugated seams between jointing sections eliminate the need for bottom seam splices. Load Depths: 3″ through 9″.Channel Cable Tray is available in the following material types: mill steel, carbon steel, pre-galvanized steel, steel HDG, and stainless steel, aluminum, polymer alloy, plastic, FRP or GRP.

perforated cable tray allows for hold down or cable attachment, and heat dissipation.
The continuous perforated cable tray allows for constant cable support. Our products consist of Wire Mesh Cable Tray, Cable Tray with holes , solid pan bottom cable tray, Cable Trunking, Cable Ladder, Wireway, Strut Channel and accessories, which can be widely used in construction, energy, electricity and plant. We passed the ISO 9001 quality management system certification, UL Certificate (U.S.A.), and CE Certificate (E.U.)
Every straight piece of our perforated cable tray has an average length of 3000 mm, other length available against the requirements of the customers.
Moreover,H.S. also develop various accessories for our range which are used for support & installation of cables over the cable trays.

The accessories are mentioned below:
·Fitings
·Clamps
·Supports

Advantages:
·Corrosion Resistance
·Easy-installing
·Durability

Metal Perforated Cable Tray HC1 Specification

specification

Oerdering Code		W	H	L
HC1	HC1-50-50	50	50	3000
	HC1-100-50	100	50	3000
	HC1-150-50	150	50	3000
	HC1-200-50	200	50	3000
	HC1-250-50	250	50	3000
	HC1-300-50	300	50	3000
	HC1-400-50	400	50	3000
	HC1-450-50	450	50	3000
	HC1-500-50	500	50	3000
	HC1-600-50	600	50	3000
	HC1-75-75	75	75	3000
	HC1-100-75	100	75	3000
	HC1-150-75	150	75	3000
	HC1-200-75	200	75	3000
	HC1-250-75	250	75	3000
	HC1-300-75	300	75	3000
	HC1-400-75	400	75	3000
	HC1-450-75	450	75	3000
	HC1-500-75	500	75	3000
	HC1-600-75	600	75	3000
	HC1-100-100	100	100	3000
	HC1-150-100	150	100	3000
	HC1-200-100	200	100	3000
	HC1-250-100	250	100	3000
	HC1-300-100	300	100	3000
	HC1-400-100	400	100	3000
	HC1-450-100	450	100	3000
	HC1-500-100	500	100	3000
	HC1-600-100	600	100	3000

Bending components and Brackets

Schematic diagram of the Cable Tray space layout

product

Production Process

production line for Metal Cable Tray Here is production line of cable tray and welcome to visit our factory

Packing and Delivery for Cable tray

Packing Method:
1.In bundle
2.Wrapping Film,plastic tape, Plywood pallet.
3.Plywood Pallets is optional for wire basket cable tray
4.Carton for accessories
5.As per requirements

Installation case on site for Hesheng cable support system

Product application program

application

Actual Test on Site

test

Installation case on site for perforated cable tray HC1

certificate

Certificate

certificate

Product detail pictures:

Related Product Guide:

We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of OEM Factory for Cable Ladder Vs Cable Tray - HC1-C Hesheng Perforated Cable Tray – Hesheng , The product will supply to all over the world, such as: Romania, Paraguay, Islamabad, Our company will continue to adhere to the " superior quality, reputable, the user first " principle wholeheartedly. We warmly welcome friends from all walks of life to visit and give guidance, work together and create a brilliant future!

Standard finish of H.S.Perforated Cable Tray as below, customize available:

Suffix	Finish	Suffix	Finish	Suffix	Finish
G	Pre -galvanized/PG/GI	P	Powder coated	Z	Zinc plated
H	Hot dip galvanized/HDG	A	Alumnium	E	Electrolytic polishing
S4	Stainless steel SS04	FRP	Fiber reinforced plstic/GRP	M	Mill/Plain steel
S6	Stainless steel SS06	F	Fire rated