Cable ladder HL1
-
HL1- CL Hesheng Metal Cable Ladder
Cable Ladder of H.S, is an economical wire management system designed to support and protect electrical wires and cables. Cable Ladder is permitted in a variety of indoor and outdoor applications.
Ladder cable trays are designed to carry heavier cable loads compared to the standard perforated cable trays. This product group offers easiness in vertical applications. On the other hand the form of cables ladders offers natural.
Standard finish of H.S Cable Ladder as below,customize available and in varying width and load depth for many applications including primary service entrance, main power feeders, branch wiring, instrument and communications cable..,
-
HL1-EN Hesheng Metal Elbow90° for HL1
Cable Ladder provides much greater spacing between support hangers than for most other systems,providing savings in support costs and labor installation, H.S.offers a wide range of components of cable ladder, 90°Elbow is one of the components used as the connector in the place of the upright corner, making transitions from horizontal to vertical cable tray runs has never been easier or more efficient. The latest evolution in cable tray fittings, the fittings assembly was developed specifically for use in confined areas. It allows installers to transition from horizontal to vertical surfaces in less time, using significantly less space.
Standard finish of H.S. Cable Ladder HL1 as below,customize available.And in varying width and load depth for many applications including primary service entrance, main power feeders, branch wiring, instrument and communications cable..,
-
HL1-T Hesheng Metal Tee-Cross for HL1
Cable Ladder of H.S, is an economical wire management system designed to support and protect electrical wires and cables. Cable Ladder is permitted in a variety of indoor and outdoor applications.H.S. also offer a wide range of components of Hesheng cable ladder. T-Cross is one of the components used as a 3-way cross.
FEATURES
• Adjustable dividers
• Tops and sides can completely open
• Flat cover and 20-degree sloped cover models available
• Perforated fittings and straight sections
• Elbows contain three cover options: front, inside and outside
• Connecting hardware is included with each model
• Quarter-turn latches
Standard finish of H.S. Cable Ladder as below,customize available.And in varying width and load depth for many applications including primary service entrance, main power feeders, branch wiring, instrument and communications cable..,
-
HL1- C Hesheng Metal Four-Way Cross for HL1
Cable Ladder of H.S, is an economical wire management system designed to support and protect electrical wires and cables. Cable Ladder is permitted in a variety of indoor and outdoor applications.H.S. also offer a wide range of components of Hesheng cable ladder. HL1-C Cross is one of the components used as a 4-way cross.
Cable Ladder provides much greater spacing between support hangers than for most other systems,providing savings in support costs and labor installation,
Standard finish of H.S. Cable Ladder as below,customize available and in varying width and load depth for many applications including primary service entrance, main power feeders, branch wiring, instrument and communications cable..,
-
Attachment Covers for Cable Ladder HL1
H.S.offers a wide range of components of Hesheng Cable Ladder HL1，Tray covers are available for all classes of tray. They should be installed where falling objects may damage cables or where vertical tray run is accessible by pedestrian or vehicular traffic. Solid covers provide maximum mechanical protection for cables with limited heat build-up. Solid covers are available with or without flange. Flanged covers have 1⁄2in. flange.
