Cable Ladder HL3 (FRP)
-
HL3-T Hesheng Metal Alumnium Alloy Tee for Cable Ladder HL3
Commonly known as: ladder tray, cable runway. A cable ladder has a range of straight lengths and a wide range bend components designed to facilitate changing wiring directions or levels simply, without the necessary to modify any components. Ladders are recognized as the strongest products to support cables, providing high load capabilities over long spans, and thus are often to be installed on sites where it’s necessary to distribute high volumes of cables safely, reliably and quickly ,which is sharply important to the project managers.
Cable Ladder provides much greater spacing between support hangers than for most other systems,providing savings in support costs and labor installation, H.S.offers a wide range of components of cable ladder, 90°Elbow is one of the components used as the connector in the place of the upright corner, HL3-E Elbow is the same as the straight through part with the strengthening cross bar and much larger cable load than Hl1 & HL2 Cable ladder.
Standard finish of H.S. Cable Ladder HL3 as below, customize available and in varying width and load depth for many applications including primary service entrance, main power feeders, branch wiring, instrument and communications cable..,
-
HL3-E Hesheng Metal Stainless Steel Elbow90° For Cable Ladder HL3
Cable Ladder of H.S is an economical wire management system designed to support and protect electrical wires and cables. Cable LadderHL3 with strengthening cross bars is different from the HL1 of perforated cross bars and being of the larger loading heavy than style HL1 .Cable Ladders are applied in many conditions of both indoor and outdoor.
A cable ladder has a simple design of side rails with rungs connected. The rungs are perforated, which makes it easy to fasten cable ties or cable cleats directly onto the ladder.
● It is of stronger build. Configuration is easy.
● It is of stronger build. Configuration is easy.
● Air circulation is free hence derating of cable ,so current carrying capacity is not required.
● Less accessories are required.
● Can carry more load
● Cable ladders are used in industrial spaces or in the basements etc, which are not public areas.Standard finish of H.S. Cable Ladder HL3 as below, customize available and in varying width and load depth for many applications including primary service entrance, main power feeders, branch wiring, instrument and communications cable..,
-
HL3-C Hesheng Metal Four Way Cross for Cable Ladder HL3
Ladder tray systems are a cost effective alternative and allow for easy installation of cables by electricians as well as future access for adding or removing cable runs. All models are UL-classified and meet National Electrical Manufacturers Association (NEMA) VE-1 standards for metal cable tray systems.
Cable LadderHL3 with strengthening cross bars is different from the HL1 of perforated cross bars and being of the larger loading heavy .Cable Ladder is permitted in a variety of indoor and outdoor applications.
Cable Ladder provides much greater spacing between support hangers than for most other systems,providing savings in support costs and labor installation, H.S.offers a wide range of components of cable ladder, 4-way cross is one of the components used as the connector of the 4 branches , HL3-C Cross is the same as the straight through part with the strengthening cross bars and much larger cable load than Hl1 & HL2 Cable ladder.
Standard finish of H.S. Cable Ladder HL3 as below, customize available and in varying width and load depth for many applications including primary service entrance, main power feeders, branch wiring, instrument and communications cable..,
-
HL3-CL Hesheng Mild Steel with Zinc- Coated Cable Ladder
Cable Ladder HL3 of H.S is an economical wire management system designed to support and protect electrical wires and cables and Cable Ladder HL3 with strengthening cross bars is different from the HL1 of perforated cross bar, which is permitted in a variety of indoor and outdoor applications.
Cable Ladder trays HL3 are of two side beams connected with individual transverse rungs and this kind of structure provides solid side rail protection and system strength with a serials of matching smooth radius fittings and a wide selection of materials and finishes. Materials available: Aluminum, Mill galvanized Steel, Steel HDG, and Stainless Steel. Cable Tray Rung Spacing is available in 6″, 9″, 12″ and 18″ and Load Depths are available in 3″ through 9″.
