HL1-T Hesheng Metal Tee-Cross for HL1
HL1-T Tee
Hesheng Cable Ladder is an economical wire management system designed to support and protect electrical wires and cables. Cable Ladder is permitted in a variety of indoor and outdoor applications. H.S. also offer a wide range of components of Hesheng cable ladder. T-Cross is one of the components used as a 3-way cross.
Hesheng Group provides a series of cable supports:
Wire Mesh Cable Tray, Perforated Cable Tray, Cable Trunking, Cable Ladder, Wireway, Strut Channel and accessories. Our products can be widely used in construction, energy, electricity, plant. We passed the ISO 9001 quality management system certification, UL Certificate (U.S.A.), and CE Certificate (E.U.)
H.S.Cable ladder systems can provide significant advantages in cable fill over other wiring methods. This can provide savings in the size or number of raceways required thereby reducing both material and labor costs.
Cable Ladder permits much greater spacing between support hangers than for most other systems,providing savings in support costs and labor installation,
Standard finish of H.S. Cable Ladder HL1,customize available and in varying width and load depth for many applications including primary service entrance, main power feeders, branch wiring, instrument and communications cable..,
· H--- Hot Dip Galvanized.
· G--- Pre-galvanized steel .
· S4-- Stainless Steel SS304.
· S6-- Stainless Steel SS316.
· P--- Powder Coated.
· A--- Aluminium.
· FRP-Fiberglass Reinforced Plastics/ GRP.
Every piece of H.S.Cable Ladder has an average length of 3000 mm,6000 mm and other length available as per the client requirements.Moreover,H.S. also develop various
accessories for our range which are used for support & installation of cables over the Cable Ladders.
The accessories are mentioned below:
·Fitting
·Clamp
Supports Advantages:
· From light to heavy load
·Good lateral stability ·No nasty sharp edges
·Open profiles provide better corrosion protection
·Reduced weight without loosing strength
Production line for Metal Cable Tray Here is processing line of cable support system and welcome to visit our plant
Packing Method:
1.In bundle
2.Wrapping Film,plastic tape, Plywood pallet.
3.Plywood Pallets is optional for wire basket cable tray
4.Carton for accessories
5.As per requirements
Installation cases on site for cable tray with holes, metal cable ladder,metal cable trunking,wire mesh cable tray,wireway, cable channel,solid bottom cabletray, polymer alloy cable tray,which can be applied for the Aluminium Processing Plant , Steel Plant , R&D and Production Base of TCM Thermal Power Plant, Data Center ,Seaside Engineering, Oil & Gas Downstream, Waste Incineration, Power Plant.
Standard finish of H.S.Perforated Cable Tray as below, customize available:
Suffix | Finish | Suffix | Finish | Suffix | Finish |
G | Pre -galvanized/PG/GI | P | Powder coated | Z | Zinc plated |
H | Hot dip galvanized/HDG | A | Alumnium | E | Electrolytic polishing |
S4 | Stainless steel SS04 | FRP | Fiber reinforced plstic/GRP | M | Mill/Plain steel |
S6 | Stainless steel SS06 | F | Fire rated |