HT1-LR Hesheng Metal Left Hand Reducer for Cable Trunking

Short Description:

Cable Trunking of H.S. is an enclosed wiring running system used to support and protect electrical wires and cables. HT1-LR Left Hand Reducer is one of the Hesheng cable trunking components , applied as reducer connector at left side.

Cable Trunking is permitted in a variety of indoor and outdoor applications.

Cable Trunking Advantages:

· reasonable and easy maintaining and installation means.

· The cables are contained in trunking, there is no risk of cable insulation to be damaged.

· Cables are safe enough against dust and humidity.

· Alternations are easy accessible.

· Trunking systems has a long service life.

Send email to us

Product Detail

Standard

Product Tags

Product description

Hesheng HT1-LR Left Hand Reducer
Hesheng CableTrunking HT1 is ideal solution for instrumentation cable and electrical cable runs in industrial or commercial cable management applications, helping eliminate the need for conduit or ladder, used for cable and wire junction, distribution and termination. HT1-LR Left Hand Reducer is one of the Hesheng cable trunking components ,used as reducer connector at left side. Cable trunking system can be made waterproof or submersible. Metal trunking can be used to shield sensitive circuits from electromagnetic interference, and also can prevent emission of such interference from enclosed power cables. Non-metallic trunking resist corrosion and are light-weight, reducing installation labor cost.

Hesheng Cable Trunking HT1 allows for holding down or cable attachment, and heat dissipation.
When installed with proper sealing fittings, a trunking will not permit the flow of flammable gases and vapors, which provides protection from fire and explosion hazard in areas handling volatile substances.
Some types of cable trays are approved for direct encasement in concrete. This is commonly used in commercial buildings to allow electrical and communication outlets to be installed in the middle of large open areas. For example, retail display cases and open-office areas use floor-mounted conduit boxes to connect power and communications cables.

Standard finish of H.S. Cable Trunking as below,customize available:
·G---- Pre-galvanized steel
· H---. Hot Dip Galvanized
·S4 -- Stainless Steel SS304
· S6-- Stainless Steel SS316
· A---. Aluminium
·FRP- Fiberglass Reinforced Plastics / GRP H,S

Basic Information

Product Specifications

Ordering Code		W(mm)	H(mm)
HT1-LR	HT1-LR-100-100	100	100
	HT1-LR-150-100	150	100
	HT1-LR-200-100	200	100
	HT1-LR-300-100	300	100
	HT1-LR-400-100	400	100
	HT1-LR-450-100	450	100
	HT1-LR-500-100	500	100
	HT1-LR-600-100	600	100

Components and Brackets of Cable Trunking HT1

Schematic Diagram of the Cable Trunking Space Layout

Production Process

Production line for Metal Cable Tray Here is processing line of cable support system and welcome to visit our plant

Installation Guide for Hesheng HT1-LR Left Hand Reducer

Packing and Delivery for Cable tray

Packing Method:
1.In bundle
2.Wrapping Film,plastic tape, Plywood pallet.
3.Plywood Pallets is optional for wire basket cable tray
4.Carton for accessories
5.As per requirements

Installation case on site for Hesheng cable support system

Product application program

Actual Test on Site

Certificate

Previous: HT1-OR Hesheng Metal Outside Riser for Cable Trunking

Next: HT1-RR Hesheng Metal Right Hand Riser for Cable Trunking

Standard finish of H.S.Perforated Cable Tray as below, customize available:

Suffix	Finish	Suffix	Finish	Suffix	Finish
G	Pre -galvanized/PG/GI	P	Powder coated	Z	Zinc plated
H	Hot dip galvanized/HDG	A	Alumnium	E	Electrolytic polishing
S4	Stainless steel SS04	FRP	Fiber reinforced plstic/GRP	M	Mill/Plain steel
S6	Stainless steel SS06	F	Fire rated