Products

  • HL1- C Hesheng Metal Four-Way Cross for HL1

    HL1- C Hesheng Metal Four-Way Cross for HL1

    Cable Ladder of H.S, is an economical wire management system designed to support and protect electrical wires and cables. Cable Ladder is permitted in a variety of indoor and outdoor applications.H.S. also offer a wide range of components of Hesheng cable ladder. HL1-C Cross is one of the components used as a 4-way cross.

    Cable Ladder provides much greater spacing between support hangers than for most other systems,providing savings in support costs and labor installation,

    Standard finish of H.S. Cable Ladder as below,customize available and in varying width and load depth for many applications including primary service entrance, main power feeders, branch wiring, instrument and communications cable..,

  • HC1-RR Hesheng Perforated Right Hand Reducer

    HC1-RR Hesheng Perforated Right Hand Reducer

    H.S.offers a wide range of components of perforated cable trays.Right Hand Reducer is one of the components,used as reducer connector of right side. Perforated cable tray is a kind of cable tray with holes on bottom sheet and side rails for laying power and signal cables for the purpose of distributing electricity, signaling in industrial plants, department stores, gyms, hospitals, airports and other industries.

    These perforated cable trays are offered in different materials , generally fabricated in mild steel.

  • HC1-IR Hesheng Perforated Inside Riser

    HC1-IR Hesheng Perforated Inside Riser

    H.S.offer a wide range of compents of perforated cable trays. Inside Riser is one of the components,used as vertical downward bend.

    These perforated cable trays are offered in different materials , generally fabricated in mild steel.

  • HC1-C Hesheng Perforated Four-Way Cross

    HC1-C Hesheng Perforated Four-Way Cross

    H.S.offer a wide range of compents of perforated cable trays. 4-WAY CROSS is one of the components installed in the branch of four ways.
    FEATURES
    • Adjustable dividers
    • Tops and sides can completely open
    • Flat cover and 20-degree sloped cover models available
    • Perforated fittings and straight sections
    • Elbows contain three cover options: front, inside and outside
    • Connecting hardware is included with each model
    • Quarter-turn latches

  • HC1-T Hesheng Perforated Tee-Cross

    HC1-T Hesheng Perforated Tee-Cross

    H.S.offer a wide range of components of perforated cable trays. T-Cross is one of the components mainly used at the three-way branch.

    Bend cable tray
    • Horizontal bends (90°, 60°, 45° and 30°)
    • Horizontal tees and crosses
    • Vertical bends (90°, 60°, 45° and 30°)
    These tees of perforated cable trays are offered in different materials , generally fabricated in mild

  • HC1-E Hesheng Perforated Elbow 90°

    HC1-E Hesheng Perforated Elbow 90°

    H.S.offer a wide range of compents of perforated cable trays. 90°Elbow is one of the components used as the connector in the place of 90°corner.

    These perforated cable trays are offered in different materials , generally fabricated in mild steel.

  • HM-SB Hesheng Metal Straight Bracket

    HM-SB Hesheng Metal Straight Bracket

    H.S.Wire Mesh Cable Supporting Systems are fabricated by ASTM A510 high strength steel wires. Continuous wire mesh steel line is processed automatedly from welding process line , which is formed into our Wire Mesh Cable Tray system. The standard 2″x4″(50×100 mm) wire mesh pattern is designed for maximum flexibility, accounting for easy field cutting, bending, assembly and cable drop outs easily.

    H.S.Wire Mesh Cable Tray provides premium performance in commercial and light industrial applications.Hesheng Wire Mesh Cable Tray is completed with all the accessories you need. Straight and waved edge can be chosen by customer. HM Straight Bracket is one of the attachments , which is fixed to the roof ,in order to hang the cable tray from the ceiling.

  • HT2 Hesheng Metal Stainless Steel Zinc-Plated Steel Alumnium Alloy FRP Cable Trunking(FRP)

    HT2 Hesheng Metal Stainless Steel Zinc-Plated Steel Alumnium Alloy FRP Cable Trunking(FRP)

    Cable Trunking HT2 (FRP) of H.S.is wire management system fabricated in the material of fiber reinforced plastic (FRP) and designed to support and protect electrical wires and cables.

    Cable Trunking is permitted in a variety of indoor and outdoor applications.

    Cable Trunking HT2 Advantages:

    · easy installation method.

    · The cables are enclosed in trunking, there is no risk of cable insulation to be damaged.
    · Cables are safe against dust and humidity.

    · Perfect anti-corrosion

    · Good flame- retardant

    · Alternations are possible.

    · Trunking systems has a long life.

    Disadvantages:

    · Expensive compare to other wiring systems.

    · Care and good workmanship are needed to ensure a successful installation.

  • HW-EN Hesheng Metal Easily Installed Elbow 90° for Wireway

    HW-EN Hesheng Metal Easily Installed Elbow 90° for Wireway

    Cable Management Wireway(Raceway) is designed to protect and house runs of control and power cables. Also called the Hesheng Wireway(Raceway), this cable management system is used for cable and wire junction, distribution and termination where complete containment is required.

    Standard of H.S. Wireway:

    ·UL870 listed

    ·NEMA standard

    Construction of H.S.Wireway:

    ·Wireway body and cover are made of code gauge steel

    ·Wireway body presents with mounting holes on the back

    ·Wireway is available with or without knockouts on the top and bottom sides

    ·Wireway fittings have no knockouts, ends are available with or without knockouts

    ·Wireway ‘s cover are attached with formed hinges on one side

  • HC1-LR Left Hand Reducer

    HC1-LR Left Hand Reducer

    H.S.offers a wide range of components of perforated cable trays.Left Hand Reducer is one of the components,used as reducer connector at left side.

    These perforated cable trays are offered in different materials , generally fabricated in mild steel.

  • HT1-C Hesheng Metal Four-Way Cross for Cable Trunking

    HT1-C Hesheng Metal Four-Way Cross for Cable Trunking

    Cable Trunking of H.S.is an circuited wiring system designed to support and protect electrical wires and cables. HT1- C Cross is one of the Hesheng cable trunking components , used as the connector in the place of the 4-way branch junction.

    Cable Trunking superiorities

    · economical and easy installation .

    · enclosed in trunking, it’s difficult for cable insulation to be destroyed and corroded.

    · Alternations are easy acceptable.

    · Trunking systems has a long service life.

    Disadvantages:

    · Expensive compare to other wiring systems.

    · Care and good workmanship are needed to ensure a successful installation.

  • Strengthening Bracket  STNB1

    Strengthening Bracket STNB1

    Hesheng also offers a wide range of components and fittings of cable trays. The Strengthening slotted or plain or back to back Bracket STNB1 is one of the fittings, which is attached to a wall and used to support or hold up cable or electric wire supporting system.

    Trays can be suspended either in the ceiling, in a raised floor, or mounted along walls with optional kits or brackets.Strut channel is manufactured from stainless steel for use where rusting might become a problem (e.g., outdoors, facilities with corrosive materials), from aluminium alloy when weight is an issue or from fiberglass for very corrosive environments.

    Several variations are available with different hole patterns for mounting to walls and supports. Solid channel has no holes predrilled, and must either be drilled on site or mounted in another fashion. Punched channel has round holes, large enough for 5/8 inch threaded steel rod or bolts, punched in the top of the channel at regular 1 7/8 inch centers. Half-slot channel has short, rounded end rectangular slots punched out on 2 inch centers. Slot channel has longer slots on 4 inch centers.

    H .S. Strut Channel is the original metal framing system featuring a unique weldless connection. The H .S. Channel Strut or C channel or U type channel system eliminates welding and drilling, and is easily adjustable and reusable for infinite configurations.

-->